Bertazzoni PM36 3 0G X Manuel d'installation télécharger pdf (Page 12)

heavy, coarse cloth, it will need to be reseasoned. Never flood the hot griddle with cold water. This could

cause the griddle to crack or warp.

Do not touch the griddle when it is hot

Note: do not use the scouring sponge to clean the stainless-steel frame, this will leave scratch marks. Do not

use metal pot cleaners, steel wool, wire brush or similar.

Some food can leave white marks after cleaning the appliance. You can remove these marks using lemon

juice.

Cleaning the enamelled parts: Enamelled parts should be cleaned frequently with soapy water. Never use

abrasive powder. Do not leave acidic or alkaline substances on the enamelled parts (such as vinegar, lemon

juice, salt, tomato sauce, etc.) and do not wash the enamelled parts while they are still hot.

Cleaning the stainless steel parts: Clean the parts with soapy water and dry them with a soft cloth. The

shine is maintained by periodically using suitable products which can be found in the supermarket. Never

use abrasive powders.

Cleaning the burner caps: Lift the burner caps from the burner heads and wash them in soapy water and

dry thoroughly. Before replacement on the burner head ensure that the holes are not clogged.

ABNORMAL OPERATION

Any of the following are considered to be abnormal operation and may require servicing:

• Yellow tipping of the burner flame. • Burners failing to remain alight.

• Sooting up of cooking utensils. • Burners extinguished by cupboard doors.

• Burners not igniting properly. • Gas valves, which are difficult to turn.

In case the appliance fails to operate correctly, contact Bertazzoni.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Bertazzoni PM36 3 0G X Manuel d'installation Page 12