Bertazzoni REF30PIXL Manuel et guide de l'utilisateur télécharger pdf (Page 12)

Series: All

Adjust the appliance level by means of the front levelling feet

and the rear adjustable wheels.

Operate as follows:

The grille should ship taped to the back of the appliance. If by chance

it is already in place, remove the grille (it is kept in position by magnets),

adjust the height of the levelling feet

by means of a 17

mm (3/4”) wrench.

Then adjust the height of the rear wheels by turning the front adjusting

bolts

clockwise or counter-clockwise as it may be required. (Do

not use power drivers with high torque settings for this step as it could

damage the levelling mechanism)

Mount the lower ventilation grille only after the unit is nally levelled

in the niche.

Levelling

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Pas de commentaire

Bertazzoni REF30PIXL Manuel et guide de l'utilisateur Page 12