Bertazzoni KOTR30XT Fiche technique télécharger pdf (Page 2)

Disclaimer: while every effort has been made to insure the accuracy of the information contained in

this brochure, Fratelli Bertazzoni reserves the right to change any part of the information at any time

without notice.

Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of

Bertazzoni Spa.

WWW.BERTAZZONI.COM

Bertazzoni recommends to operate the appliance after it has been

installed in a cabinet. The kitchen cabinets shall be made of materials

capable of withstanding temperatures at least 117°F (65°C) above

room temperature in order to avoid possible damage to the cabinets

during oven usage. For further installation instructions refer to the

installation manual.

INSTALLATION INSTRUCTIONS

KOTR30XT

Backsplash

bottom edge of

cabinet needs to

be 30” or more from

the cooking surface

If the cabinet depth including the cabinet doors

is more than 13” then the unit must be spaced

out from wall using adequate materials supporting

150 lbs to allow proper top vent air exhaust

30"

13" max

16"

⁄2

3O" min

66"

or more from

the floor to

the top of the

microwave

30''

15'' /

max 12'' /

16'' /

29'' /

14''

1 2

Pas de commentaire

Bertazzoni KOTR30XT Fiche technique Page 2