Bertazzoni P680 1 PRO X Spécifications télécharger pdf (Page 18)

Loosen and the screw V and pull out the burner

from the support being careful not to damage the

ignition plug and the thermocouple

Unscrew the nozzle R using a 7 mm. spanner and

replace it with the nozzle for the new type of gas

according to what is indicate in the table below

ATTENTION: pay extra attention to avoid damage

to the igniter and thermocouple.

Re‐install all the parts in revers sequence

STEP 4: BROILER BURNER

Loosen the screw and pull out the burner from

the support being careful not to damage the

ignition plug and the thermocouple.

Using a 7 mm [name of the tool] unscrew the

nozzle. Replace the nozzle using the conversion

set supplied with the range or by a Bertazzoni

authorized parts warehouse. Each nozzle has a

number indicating its flow diameter printed on

the body. Consult the table on page 20 for

matching nozzles to burners.

Adjust the gap X by setting it to fully open

position.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Pas de commentaire

Bertazzoni P680 1 PRO X Spécifications Page 18