Bertazzoni DW24XT Manuel d'utilisation et d'entretien télécharger pdf (Page 8)

Features of your new dishwasher

How your dishwasher cleans

Your dishwasher cleans by spraying

a mixture ofhot water and detergent

through the spray arms

The dishwasher fills with water

covering the filterarea. Water is then

pumped through the multiple filter

and spray arms.Separated soil

particles go down the drain as the

water is pumped out and replaced

with clean water.

The number of water fills will vary

with the cyclebeing used.

against

soiled surfaces .

Getting Started

1.Load dishwasher (See preparing and

loading dishes).

2.Add detergent (See Fill detergent to the

dispenser).

3.Add rinse aid, if needed (See Fill rinse to

dispenser).

4.Select desired CYCLE (See Cycle Chart).

The indicator light that b eside the pad

will glow whenselected.

5.Select desired FUNCTIONS, the

indicator light that b eside the pad will

glow whenselected.

6.To start, press Start/Cancel(See Start/Cancel)pad.

7.Close the door,then the machine will

start to work.

Note:

1.Your dishwasher has the top control

panel. The door should be opened first

if you want to operate the machine.

2.To start a cycle, the door must be closed

within 4s after press Start/ Cancle.

Wash Cycle Selections

Cycle times are approximate and will vary

with options Selected.Hot water is

necessary to activate dishwasher detergent

and melt fatty food soils.

An automatic sensor will check the incoming

water temperature and if it is not hot

Enough,the timer will be delayed for

automatic water heating in the main wash of

all Cycles.This happens even when

HI-TEMP WASH is selected an even higher

temperature will be guaranteed to handle

heavier soil loads.

4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Commentaires sur ces manuels

Pas de commentaire